King Air / Project case study / July 2026

Thornbank Avenue.Indoor pool comfort.
Thoughtfully rebuilt.

A new dehumidifier. A new boiler. One carefully coordinated retrofit for a residential indoor pool and spa.

Original photograph from King Air's Thornbank Avenue indoor pool mechanical retrofit
Real projects. Specialist work.Thornbank Avenue / 2026

Environment

Residential indoor pool & spa

Dehumidification

Dectron DS-20

Heating

High-efficiency NTI boiler

Project duration

One week
The project, at a glance

Two new systems.
One integrated approach.

At Thornbank Avenue, an aging Dry-O-Tron and an inefficient boiler served the home’s indoor pool. Replacing them called for a plan that considered both the mechanical system and the finished residence.

King Air installed a Dectron DS-20 and a high-efficiency NTI boiler, coordinating dehumidification with pool, spa and surrounding-air heating.

02Major systems replaced
01Week from start to completion
01 / The challenge

Renew the equipment.
Respect the home.

The existing dehumidifier and boiler needed replacing, but the new systems had to be integrated into an already finished home.

New boiler venting and Dectron refrigerant lines required carefully planned routes. The goal was to modernize the mechanical system while limiting unnecessary openings, reconstruction and disruption.

  • 01 Work within the existing mechanical space
  • 02 Plan boiler venting and refrigerant-line routes
  • 03 Protect existing finishes during the retrofit
Thornbank Avenue project photograph showing the indoor pool mechanical installation
Working with the home’s existing mechanical space. Select for the full image.
Additional view of the Thornbank Avenue indoor pool retrofit
Original project photography from Thornbank Avenue.
02 / The King Air solution

Every part planned
to work together.

King Air installed a Dectron DS-20 indoor-pool dehumidification system alongside a high-efficiency NTI boiler serving pool, spa and surrounding-air heating requirements.

The team coordinated installation, boiler venting and refrigerant-line routing as one retrofit. The work was completed in one week, with the installation planned to minimize disruption to the finished home.

The difference is not just new equipment. It is how the dehumidification, heating and surrounding mechanical systems are brought together.

Why specialist experience matters

Protect the pool.
And everything around it.

Room temperature, water temperature, humidity and airflow are connected. A useful assessment looks beyond the appliance to the entire indoor pool environment.

01 / EQUIPMENT KNOWLEDGE

Built around indoor pools.

King Air works with Dectron, Dry-O-Tron, Seresco and PoolPak systems, from troubleshooting and repair to complex retrofits and replacements.

02 / COORDINATED PLANNING

Look beyond the unit.

Dehumidification, heating, controls, piping and access are considered together, rather than as disconnected installation decisions.

03 / PROPERTY FIRST

Respect the finished home.

Equipment access, installation routes and required alterations deserve careful attention. The plan should work for the property as well as the equipment.

Do the boiler and dehumidifier always need replacing together?

No. Thornbank Avenue involved replacing both. The right scope for your property depends on the condition of the existing equipment, its connections and the problems you need to solve. Start with an assessment, not an assumption that everything must be replaced.

Can the work be planned around a finished home?

That was a central requirement at Thornbank Avenue. Access, venting and refrigerant-line routes need to be assessed for each property. King Air can discuss the alterations your installation would require before the scope is finalized.

Will my project also take one week?

One week was the completion time for this project, not a standard promise. Your schedule will depend on equipment availability, access, required modifications and the agreed scope.

What should I have ready for the first conversation?

Photos of the equipment and mechanical room, model numbers, the issues you are experiencing and any recent service information are useful starting points.

Your pool. Your home. A clearer plan.

Let’s get your indoor
pool climate right.

Condensation, uncomfortable temperatures or aging equipment? Start with a conversation about your pool, your property and your priorities.